Türbin petrol motifi için değiştirilmesi Merkez25.11Z.1 PLASSER

Ürün Detayları

Pressure drop - efficiency, performance

At the normal working pressure: 0.7Mpa~1.0Mpa, the initial pressure difference of the oil separator is between 0.15bar~0.25bar.The compressed air oil content can be controlled at 3~6ppm, and the compressed air oil mist particles can be controlled below 0.1μm.

Filter material selection and production process

The oil and gas separator filter material is made of ultra-fine glass fiber composite filter material from American HV Company and American  Lydall Company. The misty oil and gas mixture in compressed air can be completely filtered out through the oil core.

Fine seam welding, spot welding process and the newly developed two-component adhesive ensure that the oil-gas separation filter has high mechanical strength and can work normally at temperatures below 120C.

Service life

The service life of oil and gas separator is more than 4000 hours. The length of life depends on many factors: the design of the oil separator barrel, the routine maintenance, the cleanliness of the environment, the quality of the lubricating oil, the working temperature, and the quality of  the oil separator.

Our products through the following test:

ISO 2941 Collap & Burst

ISO 2942 Material Compatibility with Fluids

ISO 2943 Akışkanlar ile Malzeme Uyumluluk

ISO 3724 Flow Fatigue Özellikleri

ISO 3968 Basınç Düzeyi vs. Flow Rate

ISO 16889 Multi-pass Performans Testi

Ürün özellikleri

1. Easy installation

2. There are many layers of filter material with neat ripples

3. The inner frame is firm

4. Extend the service life of the oil

5. Heavy pollution reception

6. Fast filtering speed

7. Reduce bearing wear

8. High filtering precision.

Ürün parametreleri

Ürün uygulaması

1.Chemical ve petrokimya endüstrisi

2.Firmaceutical endüstrisi

3.Malling makineleri

4. Gıda & içecek endüstrisi

5.Packing makineleri

6.Process endüstrisi