SW30-6040 Deniz suyu RO elemanları

Ürün Detayları

SW30-6040 membrane elements have on of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators.RO elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.

Properties

1. The above benchmark values are based on the following test conditions: 32,000 ppm NaCl, 5 ppm Boron, 800 psi (5.5 MPa), 77°F (25°C), pH 8 and 10% recovery.

2. Permeate flows for individual elements may vary +/-15%.

3. Product specifications may vary slightly as improvements are implemented.

4. Active area guaranteed +/-5%. Active area as stated by lvda is not comparable to the nominal membrane area figure often stated by some element suppliers.