HSRO-4040-FF RO Membran

Ürün Detayları

HSRO-4040-FF elements, manufactured on advanced automated equipment, have the highest active membrane area in the industry. This high area allows system designs with either lower operating flux or cost savings from fewer membrane elements.

Typical Properties

1. Permeate flow and salt rejection based on the following test conditions: 2,000 ppm NaCl, pressure specified above, 77°F (25°C )and 15% recovery.

2. Elements must be conditioned prior to start-up. A one-time flux loss willoccurduring stabilization. Listed valuesapplyafterperformance stabilization.

3. Permeate flows for individualelements may vary ±20%.

4. For the purpose of improvement, specifications maybe updated periodically.