P781102,AIR FILTER, SAFETY RADALSEAL

Ürün Detayları

The air filter element is set on the oil tank, which is the "mask" of the oil tank, and has the function of preventing dirt from mixing into the oil tank with the air due to the change of oil volume. Therefore, the filter element selected for this filter should have the same performance requirements as other hydraulic filter elements. The capacity of the filter element should be large to prevent the microporous blockage from turning the internal pressure of the oil tank into negative pressure and causing cavitation. Pay special attention to the protection of air filter in the open air and when the surrounding environment is bad.

The method of using air filter is to directly insert the lower part into the oil tank. There is a small hole at the bottom end of the upper cover, which is the air inlet. The part inserted into the oil tank is the filter layer.

Safety filters have two functions: to act as a backup to the primary filter and to protect the engine during primary filter servicing.

Ürün özellikleri

1.Serve as a backup filter in case of primary filter damage or improper installation.

2.Prevent contaminants from entering the clean side of the air intake system during primary filter servicing.

3.Designed to plug rapidly if contamination finds its way past the primary filter, alerting operators about an issue.

4.Recommend that safety filters are replaced with every third primary filter change unless there has been a failure of the primary filter.

Ürün parametreleri

Ürün uygulaması

1.Pharmacy,

2.Chemical Industry,

3. Gıda,

4.Drinks,

5.Çevre Koruma Koruma

6.Spin,

7.Cosmetic Production,

8.Pneumatic Conveying,

9.Pneumatic Tools,

10.Asptik Ambalaj

11.Plastik,

12.Chemical Engineering,

13. Metalware,

14.Mechanical Electromechanical,

15.Electronics,

16.Metallurgy