Replacement filter element is suitable for hydraulic oil filter C9209014

Ürün Detayları

This is a simple filter consisting of separating the container into upper and lower cavities with filter medium. The suspension is added to the upper chamber, and under the pressure, it enters the lower chamber through the filter medium to become the filtrate. The solid particles are trapped on the surface of the filter medium to form filter residue (or filter cake). During the filtration process, the filter residue layer stored on the surface of the filter medium gradually thickens, the resistance of liquid passing through the filter residue layer increases, and the filtration speed decreases. When the filter chamber is full of filter residue or the filtering speed is too small, stop filtering, remove the filter residue, and regenerate the filter medium to complete a filtering cycle. The liquid must overcome the resistance when passing through the filter residue layer and filter medium, so there must be a pressure difference on both sides of the filter medium, which is the driving force to achieve filtration. Increasing the pressure difference can accelerate the filtration, but the deformed particles after compression are easy to block the pores of the filter medium when the pressure difference is large, and the filtration is slowed down.

Ürün özellikleri

1) Large flow per unit area;

2) The filter element has even and accurate air holes;

3) Good corrosion resistance, heat resistance, pressure resistance and wear resistance;

4) The hydraulic oil filter element is suitable for low temperature and high temperature environment; It can be reused after cleaning without replacement.

5) Good filtration performance and uniform surface filtration performance for filtration particle size of 2-200um.

Ürün parametreleri

Ürün uygulaması

1.Chemical ve petrokimya endüstrisi

2.Firmaceutical endüstrisi

3.Tüksiyon filtreleri

4.Malling makineleri

5. Gıda & içecek endüstrisi

6.Packing makineleri

7.Process endüstrisi