Replacement for CLR130 Claris Depth Filter CLR130M7S,Claris Filter Cartridge CLR1-30-M7-S

CLR130 Claris Derinlik Filtre CLR130M7S,Claris Filtre Kaynağı için Makyaj

Melt-Blown Filtresi

Model numarası: CLR130M7S

Kaldırma Derecesi: 1 µm

Membran Malzemesi: Polipropilen

Kartuş Uzunluğu (İngiliz): 30 inç

Gasket / O-Ring Material : Silicone

Change Out Differential Pressure : 2.4 bard

Ürün Detayları

Get high dirt holding capacity and compatibility with a wide range of liquids with Pall's Claris family filters. This cartridge is 30-inch long with a 1-micron removal rating. It features an SOE fin end, external 226 O-rings that retrofit other manufacturers' Code 7, and silicone gaskets.

Pall Water Claris, Polypropylene media, 1 micron, 30 inch- Industrial Depth filter, 2.5" diameter with Double Open End (DOE) end configuration and no gasket

Melt blown depth filters with thermally bonded fibers for consistent and reliable filtration.

Graded pore structure and high void volume enhance dirt-holding capacity providing longer service life.

High strength extruded core for increased cartridge stability and ease of disposal.

All Polypropylene construction allows for broad chemical compatibility.

Ürün özellikleri

1.Claris Series Filter Cartridges

2.Melt blown depth filters with thermally bonded fibers for consistent and reliable filtration.

3.Graded pore structure and high void volume enhance dirt-holding capacity providing longer service life.

4.High strength extruded core for increased cartridge stability and ease of disposal.

5.All Polypropylene construction allows for broad chemical compatibility.

Ürün parametreleri

Removal Rating	1 μm
Membrane Material	Polypropylene
Cartridge Length (Imperial)	30 in
Cartridge Length (Metric)	762 mm
Cartridge Length (Metric)	76.2 cm
Gasket / O-Ring Material	Silikon
End Configuration Code	M7
End Configuration	M7 - SOE fin end, external 226 O-rings (retrofits other manufacturers’ Code 7) 5
Change Out Differential Pressure	2.4 bard
Cartridge Outer Diameter (OD) (Imperial)	2.5 in
Cartridge Outer Diameter (OD) (Metric)	6.4 cm
Gasket O-Ring Code	S
Cage, Core, Fin End and Endcap	Polypropylene

Bölüm:	2.5"
End Configuration:	Double Open End (DOE)
Filter Grade:	1 μm
Filter Length:	30"
Filter Media Type:	Depth
Flow:	Outside to Inside
Malzeme:	Polypropylene
Maximum Differential Pressure:	50 psi pressure at 68°F, 25 psi pressure at 140°F
O-Ring:	No gasket
Removal Efficiency:	Nominal